Industry News

How to deal with the problems that arise in the work of the window patcher—Anhui Hongyonghua Machinery

Because in daily life, when everyone increases satisfaction with the product, manufacturers usually need to consider many details, such as the packaging of the product. In the process of printing and packaging, every detail question may affect the quality of the final product. Then, what problems may occur after the packaging is printed?

1. Backward technology

The binding technology of packaging after printing is still relatively backward. There are two methods for glazing skills, one is glazing and calendering skills, the other is UV glazing skills, and the other is UV glazing skills. Nowadays, the glazing technology is gradually changing from liquid glazing paint to the boring technology of solid state, but the use of solid-state boring technology can not be boring while processing the exterior. If you continue to process it, it may affect the color of the ink layer.
2. Equipment defects

In the post-processing process of packaging and printing, there are few high-speed window patching machines with automatic adjustment function for the manipulation of temperature during handicraft binding, which may result in low temperature, poor drying, large deformation, high temperature, and rapid shortening or overwriting. Problems such as voiding of the membrane surface.

3. Outdated information

The adhesives used in the manual binding process are all hydrating, and the concentration may be irregular. It may cause unstable adhesion, dullness, and rusty wire nails.

The increase in market demand for packaging machinery and equipment has largely stimulated the technological upgrading of the industry. As a window patching machine company, brand new packaging models with intelligent and automated functions will gradually replace tradition and become the mainstream in the future. This is an effective way for packaging machinery companies to achieve sustainable development, and it is also the ultimate goal of technological reforms.
The main features of Anhui Hongyonghua mechanical window sticking machine are: the front and rear positions of the paper, the front and back positions of the glue, the left and right positions of the film can be adjusted without stopping the production. The adjustment of the three positions is very convenient and fast, and it is very simple and convenient to change the product. ,fast. The main structure of the window sticking machine is composed of five parts: paper feeding part; positioning part; printing glue part; film sticking part; paper receiving part. The frame adopts a full steel plate structure, which is durable.

To learn more about Anhui Hongyonghua Packaging Machinery Automatic Window Patching Machine, please leave a message for consultation
[email protected]